Description
Tectyl® 283-S-17 – Water-Displacing Non-Staining Oil Preservative
White House General Trading LLC | Authorized Tectyl Distributor in the UAE
Tectyl® 283-S-17 is a solvent-cutback, water-displacing, oil-based corrosion preventive, lubricant and penetrant. The cured film is an ultra-light, transparent, non-staining oil that protects industrial parts during long-term indoor or covered storage and domestic shipment.
Key Benefits
- Non-staining: Leaves no stains on parts.
- Ultra-thin: About 2 µm, covering roughly 87 m² per litre.
- Water displacing: Displaces water where needed.
- Fast drying: Dry to touch in 30 minutes.
Typical Applications
- Machined parts between manufacture and assembly
- Industrial parts in covered storage
- Domestic shipment of components
Performance Data
| Property | Tectyl® 283-S-17 |
|---|---|
| Carrier | Solvent (oil-based preservative) |
| Recommended dry film thickness | 2 µm |
| Salt spray (5% NaCl @ 35°C, ISO 9227 NSS) | Min. 5 days |
| Humidity (100% RH @ 40°C, ISO 6270-2 CH) | Min. 75 days |
| Manufacturer-listed indoor protection* | Min. 12 months |
Typical Properties
| Property | Value |
|---|---|
| Film appearance | Ultra-light, transparent, non-staining oil |
| Flash point (PMCC) | 40°C |
| Density @ 20°C | 0.8 kg/L |
| Non-volatile content (by weight) | 15.5% |
| Theoretical coverage @ 2 µm DFT | 87 m²/L |
| Dry to touch @ 20°C | 30 minutes |
| Cure time @ 20°C | 2-3 hours |
| Application temperature | 10-35°C |
| Storage temperature | 10-35°C |
| VOC content (ISO 11890-2) | 683 g/L |
| Shelf life | 36 months from production |
Typical properties may vary between production batches. Laboratory test results apply to the stated method and film thickness. Listed protection periods are manufacturer reference values, not a site-specific service-life guarantee. Actual protection depends on preparation, film thickness, exposure, handling and inspection. Theoretical coverage excludes application losses.
Surface Preparation
For best results, the metal surface should be clean, dry and free from rust, oil and mill scale. The substrate temperature should be between 10°C and 35°C when you apply the product.
Application
Supplied ready to use. Do not thin.
Apply by low-pressure air spray or dipping at 10-35°C.
Removal
Wet or dry: Remove with Tectyl® Biocleaner or Tectyl® 150.
Storage & Shelf Life
Store between 10°C and 35°C.
Do not allow the product to freeze.
Agitate gently before use; viscosity can change during storage.
When stored correctly, the product is best used within 36 months of the production date.
Coating Compatibility
Nothing can be applied over Tectyl® 283-S-17, and products underneath are not recommended.
Health, Safety & Handling
Read the current Safety Data Sheet (SDS) and product label for the exact supplied grade and market before use. Follow their requirements for ventilation, personal protective equipment, ignition control, storage, first aid and disposal. Do not discharge residues into drains, soil or water. Request the matching SDS from White House General Trading.
Frequently Asked Questions
What is Tectyl® 283-S-17 used for?
Tectyl® 283-S-17 is a solvent-cutback, water-displacing, oil-based corrosion preventive, lubricant and penetrant. The cured film is an ultra-light, transparent, non-staining oil that protects industrial parts during long-term indoor or covered storage and domestic shipment.
How is Tectyl® 283-S-17 applied?
Supplied ready to use. Do not thin. Apply by low-pressure air spray or dipping at 10-35°C.
Can Tectyl® 283-S-17 be removed?
Wet or dry: Remove with Tectyl® Biocleaner or Tectyl® 150.
How should Tectyl® 283-S-17 be stored?
Store between 10°C and 35°C. Do not allow the product to freeze. Agitate gently before use; viscosity can change during storage. When stored correctly, the product is best used within 36 months of the production date.
Where can I request Tectyl® 283-S-17 in the UAE?
Contact White House General Trading LLC, an authorized Tectyl distributor based in the UAE, for product selection, technical documents, availability and a quotation. Include the quantity, application and delivery destination.
Technical Documents
Manufacturer technical data sheet
Technical values above refer to the Europe-manufactured product documentation reviewed on 7 October 2026. Confirm that the current documents match the supplied product and market.
Explore More Tectyl® Resources
Choosing corrosion protection depends on your application, operating environment, and required protection period. Explore the Tectyl® Knowledge Hub for practical guidance on industrial corrosion protection, asset preservation, export packaging, long-term storage, and product selection.
For more guidance, browse our technical articles and corrosion prevention tips.
Explore Related Tectyl® Solutions
Compare products for different preservation and protection needs. For help confirming suitability for your application, contact our technical team.
- Tectyl® 502-C — Explore gearbox corrosion prevention.
- Tectyl® 506 — Learn about corrosion protection coatings.
- Tectyl® 506-EH Extra Heavy — Explore extra-heavy corrosion protection.
- Tectyl® 930 — Learn about engine preservation oil.
- Tectyl® Cavity Wax Non-Solvent Aerosol — Explore cavity protection in an aerosol format.
Why Choose White House General Trading?
White House General Trading LLC is an authorized Tectyl distributor based in the UAE, supporting product enquiries across the GCC, Middle East and Africa. Our team helps customers in industrial, marine, automotive, energy and manufacturing applications select products against their preservation and protection requirements.
Need Product Selection Support or a Quotation?
Tell us about the asset you need to protect, its operating or storage environment, and the required protection period. Our corrosion protection specialists can help you assess suitable products and application requirements.
