Description
Tectyl® Bodysafe – Black Brush-On Underbody Coating
White House General Trading LLC | Authorized Tectyl Distributor in the UAE
Tectyl® Bodysafe is a solvent-cutback, wax/asphaltic, thixotropic corrosion preventive for the undersides of vehicles. It is applied by brush and cures to a relatively firm, black, resilient, tough film that protects against stone chipping and corrosion.
Key Benefits
- Brush-on: Easy workshop application without spray equipment.
- Strong protection: 40 days salt spray and 100 days humidity at 250 µm.
- Multiple substrates: Metal chassis and wooden undersides.
Typical Applications
- Cars, trucks, buses, campers and trailers
- Spot repair of underbody coating
- Wooden undersides of caravans
Performance Data
| Property | Tectyl® Bodysafe |
|---|---|
| Carrier | Solvent |
| Recommended dry film thickness | 250 µm |
| Salt spray (5% NaCl @ 35°C, ISO 9227 NSS) | Min. 40 days |
| Humidity (100% RH @ 40°C, ISO 6270-2 CH) | Min. 100 days |
| Manufacturer-listed indoor protection* | Min. 36 months |
| Manufacturer-listed outdoor protection* | Min. 18 months |
Typical Properties
| Property | Value |
|---|---|
| Film appearance | Relatively firm, black, resilient, tough |
| Flash point (PMCC) | 40°C |
| Density @ 20°C | 0.91 kg/L |
| Non-volatile content (by weight) | 60% |
| Theoretical coverage @ 250 µm DFT | 2.1 m²/L |
| Dry to touch @ 20°C | 4 hours |
| Cure time @ 20°C | 24 hours |
| Application temperature | 10-35°C |
| Storage temperature | 10-35°C |
| VOC content (ISO 11890-2) | 362 g/L |
| Shelf life | 24 months from production |
Typical properties may vary between production batches. Laboratory test results apply to the stated method and film thickness. Listed protection periods are manufacturer reference values, not a site-specific service-life guarantee. Actual protection depends on preparation, film thickness, exposure, handling and inspection. Theoretical coverage excludes application losses.
Surface Preparation
For best results, the metal surface should be clean, dry and free from rust, oil and mill scale. The substrate temperature should be between 10°C and 35°C when you apply the product. Avoid direct contact with PVC because of possible material incompatibility.
Application
Supplied ready to use.
Apply by brush at 10-35°C.
Do not apply on moving mechanical parts or catalytic converters.
Removal
While still wet: Remove with Tectyl® Biocleaner, Tectyl® 150 or low-pressure steam.
After drying and curing: Remove with Tectyl® Biocleaner or Tectyl® 150.
Storage & Shelf Life
Store between 10°C and 35°C.
Do not allow the product to freeze.
Agitate gently before use; viscosity can change during storage.
When stored correctly, the product is best used within 24 months of the production date.
Coating Compatibility
Nothing can be applied over Tectyl® Bodysafe. Do not apply on moving mechanical parts or catalytic converters.
Health, Safety & Handling
Read the current Safety Data Sheet (SDS) and product label for the exact supplied grade and market before use. Follow their requirements for ventilation, personal protective equipment, ignition control, storage, first aid and disposal. Do not discharge residues into drains, soil or water. Request the matching SDS from White House General Trading.
Frequently Asked Questions
What is Tectyl® Bodysafe used for?
Tectyl® Bodysafe is a solvent-cutback, wax/asphaltic, thixotropic corrosion preventive for the undersides of vehicles. It is applied by brush and cures to a relatively firm, black, resilient, tough film that protects against stone chipping and corrosion.
How is Tectyl® Bodysafe applied?
Supplied ready to use. Apply by brush at 10-35°C. Do not apply on moving mechanical parts or catalytic converters.
Can Tectyl® Bodysafe be removed?
While still wet: Remove with Tectyl® Biocleaner, Tectyl® 150 or low-pressure steam. After drying and curing: Remove with Tectyl® Biocleaner or Tectyl® 150.
How should Tectyl® Bodysafe be stored?
Store between 10°C and 35°C. Do not allow the product to freeze. Agitate gently before use; viscosity can change during storage. When stored correctly, the product is best used within 24 months of the production date.
Where can I request Tectyl® Bodysafe in the UAE?
Contact White House General Trading LLC, an authorized Tectyl distributor based in the UAE, for product selection, technical documents, availability and a quotation. Include the quantity, application and delivery destination.
Technical Documents
Manufacturer technical data sheet
Technical values above refer to the Europe-manufactured product documentation reviewed on 7 October 2026. Confirm that the current documents match the supplied product and market.
Explore More Tectyl® Resources
Choosing corrosion protection depends on your application, operating environment, and required protection period. Explore the Tectyl® Knowledge Hub for practical guidance on industrial corrosion protection, asset preservation, export packaging, long-term storage, and product selection.
For more guidance, browse our technical articles and corrosion prevention tips.
Explore Related Tectyl® Solutions
Compare products for different preservation and protection needs. For help confirming suitability for your application, contact our technical team.
- Tectyl® 502-C — Explore gearbox corrosion prevention.
- Tectyl® 506 — Learn about corrosion protection coatings.
- Tectyl® 506-EH Extra Heavy — Explore extra-heavy corrosion protection.
- Tectyl® 930 — Learn about engine preservation oil.
- Tectyl® Cavity Wax Non-Solvent Aerosol — Explore cavity protection in an aerosol format.
Why Choose White House General Trading?
White House General Trading LLC is an authorized Tectyl distributor based in the UAE, supporting product enquiries across the GCC, Middle East and Africa. Our team helps customers in industrial, marine, automotive, energy and manufacturing applications select products against their preservation and protection requirements.
Need Product Selection Support or a Quotation?
Tell us about the asset you need to protect, its operating or storage environment, and the required protection period. Our corrosion protection specialists can help you assess suitable products and application requirements.
