Description
Tectyl® Multipurpose Amber – Water-Displacing Wax Corrosion Preventive Aerosol
White House General Trading LLC | Authorized Tectyl Distributor in the UAE
Tectyl® Multipurpose Amber is a wax-based, solvent-cutback, amber corrosion preventive in an aerosol. It has good water-displacing and penetration properties. It is a versatile protective for automotive, marine, household and industrial applications, and cures to an amber, waxy, semi-firm, translucent film.
Key Benefits
- Versatile: One aerosol for automotive, marine, household and industrial parts.
- Water displacing: Penetrates and displaces moisture from crevices.
- Easy to remove: Removable with Tectyl® 150 or Biocleaner when no longer needed.
Typical Applications
- Machined surfaces, tools and spare parts in maintenance stores
- Marine hardware, winches and fittings
- Parts in storage and overseas transport
- General workshop and household maintenance
Performance Data
| Property | Tectyl® Multipurpose Amber |
|---|---|
| Recommended dry film thickness | 50 µm |
| Salt spray (5% NaCl @ 35°C, ISO 9227 NSS) | Min. 21 days |
| Humidity (100% RH @ 40°C, ISO 6270-2 CH) | Min. 75 days |
| Manufacturer-listed indoor protection* | Min. 36 months |
| Manufacturer-listed outdoor protection* | Min. 12 months |
Typical Properties
| Property | Value |
|---|---|
| Film appearance | Amber, waxy, semi-firm, translucent |
| Density @ 20°C | 0.87 kg/L |
| Application temperature | 10-25°C |
| Storage temperature | 10-35°C |
| Propellant | Propane/butane |
| VOC content (ISO 11890-2) | 634 g/L |
| Shelf life | 36 months from production |
Typical properties may vary between production batches. Laboratory test results apply to the stated method and film thickness. Listed protection periods are manufacturer reference values, not a site-specific service-life guarantee. Actual protection depends on preparation, film thickness, exposure, handling and inspection. Theoretical coverage excludes application losses.
Surface Preparation
For best results, the metal surface should be clean, dry and free from rust, oil and mill scale. The substrate temperature should be between 10°C and 35°C when you apply the product.
Application
Shake the can well before use.
For best results, spray when the can and the air are between 10°C and 25°C.
Spray from a distance of about 30 cm onto clean, dry metal.
The product dries fast. To avoid pin-holing, apply one layer per pass, wait 2-3 minutes, then apply the next layer until the required film thickness is reached.
Removal
While still wet: Remove with Tectyl® Biocleaner, Tectyl® 150 or low-pressure steam.
After drying and curing: Remove with Tectyl® 150 or Tectyl® Biocleaner.
Storage & Shelf Life
Store between 10°C and 35°C.
Do not allow the can to freeze.
Shake well before use.
When stored correctly, the product is best used within 36 months of the production date.
Coating Compatibility
Nothing can be applied over Tectyl® Multipurpose Amber, and products underneath are not recommended.
Health, Safety & Handling
Read the current Safety Data Sheet (SDS) and product label for the exact supplied grade and market before use. Follow their requirements for ventilation, personal protective equipment, ignition control, storage, first aid and disposal. Do not discharge residues into drains, soil or water. Request the matching SDS from White House General Trading.
This is a pressurised aerosol containing a flammable propellant. Keep it away from heat and ignition sources and use adequate ventilation, following the current can label and SDS.
Frequently Asked Questions
What is Tectyl® Multipurpose Amber Aerosol used for?
Tectyl® Multipurpose Amber is a wax-based, solvent-cutback, amber corrosion preventive in an aerosol. It has good water-displacing and penetration properties. It is a versatile protective for automotive, marine, household and industrial applications, and cures to an amber, waxy, semi-firm, translucent film.
How is Tectyl® Multipurpose Amber Aerosol applied?
Shake the can well before use. For best results, spray when the can and the air are between 10°C and 25°C. Spray from a distance of about 30 cm onto clean, dry metal. The product dries fast. To avoid pin-holing, apply one layer per pass, wait 2-3 minutes, then apply the next layer until the required film thickness is reached.
Can Tectyl® Multipurpose Amber Aerosol be removed?
While still wet: Remove with Tectyl® Biocleaner, Tectyl® 150 or low-pressure steam. After drying and curing: Remove with Tectyl® 150 or Tectyl® Biocleaner.
How should Tectyl® Multipurpose Amber Aerosol be stored?
Store between 10°C and 35°C. Do not allow the can to freeze. Shake well before use. When stored correctly, the product is best used within 36 months of the production date.
Where can I request Tectyl® Multipurpose Amber Aerosol in the UAE?
Contact White House General Trading LLC, an authorized Tectyl distributor based in the UAE, for product selection, technical documents, availability and a quotation. Include the quantity, application and delivery destination.
Technical Documents
Manufacturer technical data sheet
Technical values above refer to the Europe-manufactured product documentation reviewed on 7 October 2026. Confirm that the current documents match the supplied product and market.
Explore More Tectyl® Resources
Choosing corrosion protection depends on your application, operating environment, and required protection period. Explore the Tectyl® Knowledge Hub for practical guidance on industrial corrosion protection, asset preservation, export packaging, long-term storage, and product selection.
For more guidance, browse our technical articles and corrosion prevention tips.
Explore Related Tectyl® Solutions
Compare products for different preservation and protection needs. For help confirming suitability for your application, contact our technical team.
- Tectyl® 502-C — Explore gearbox corrosion prevention.
- Tectyl® 506 — Learn about corrosion protection coatings.
- Tectyl® 506-EH Extra Heavy — Explore extra-heavy corrosion protection.
- Tectyl® 930 — Learn about engine preservation oil.
- Tectyl® Cavity Wax Non-Solvent Aerosol — Explore cavity protection in an aerosol format.
Why Choose White House General Trading?
White House General Trading LLC is an authorized Tectyl distributor based in the UAE, supporting product enquiries across the GCC, Middle East and Africa. Our team helps customers in industrial, marine, automotive, energy and manufacturing applications select products against their preservation and protection requirements.
Need Product Selection Support or a Quotation?
Tell us about the asset you need to protect, its operating or storage environment, and the required protection period. Our corrosion protection specialists can help you assess suitable products and application requirements.
