Description
Tectyl® 1079 – Transit Wax Preservative for Painted Surfaces
White House General Trading LLC | Authorized Tectyl Distributor in the UAE
Tectyl® 1079 is a light-coloured, solvent-cutback, wax-based paint preservative compound. It protects painted surfaces against atmospheric and environmental influences during transport and storage, and cures to a light-coloured, translucent, firm film.
Key Benefits
- Paint protection: Shields painted surfaces during local transport, storage and overseas shipment.
- Thin film: Only 20 µm needed.
Typical Applications
- Painted machinery and equipment shipped by sea
- New vehicles and plant in ports or open compounds
- Painted components before delivery
Performance Data
| Property | Tectyl® 1079 |
|---|---|
| Carrier | Solvent |
| Recommended dry film thickness | 20 µm |
| Salt spray (5% NaCl @ 35°C, ISO 9227 NSS) | Min. 2 days |
| Humidity (100% RH @ 40°C, ISO 6270-2 CH) | Min. 15 days |
| Manufacturer-listed indoor protection* | Min. 12 months |
| Manufacturer-listed outdoor protection* | Min. 6 months |
Typical Properties
| Property | Value |
|---|---|
| Film appearance | Light-coloured, translucent, firm |
| Flash point (PMCC) | 28°C |
| Density @ 20°C | 0.795 kg/L |
| Non-volatile content (by weight) | 20% |
| Theoretical coverage @ 20 µm DFT | 8.4 m²/L |
| Viscosity (Zahn cup 4) | 26 s |
| Cure time @ 20°C | 1-2 hours |
| Application temperature | 15-35°C |
| Storage temperature | 15-35°C |
| VOC content (ISO 11890-2) | 755 g/L |
| Shelf life | 36 months from production |
Typical properties may vary between production batches. Laboratory test results apply to the stated method and film thickness. Listed protection periods are manufacturer reference values, not a site-specific service-life guarantee. Actual protection depends on preparation, film thickness, exposure, handling and inspection. Theoretical coverage excludes application losses.
Surface Preparation
Painted surfaces must be properly cured, clean and dry. Test the paint, rubbers and synthetic parts for solvent resistance before application.
Application
Supplied ready to use; stir before use.
Apply by airless or low-pressure air spray at 15-35°C.
Removal
While still wet: Remove with Tectyl® Biocleaner, Tectyl® 150 or low-pressure steam.
After drying and curing: Remove with Tectyl® 150.
Direct sunlight: If exposed to direct sunlight, remove within 3 months and re-apply, otherwise removal becomes difficult.
Storage & Shelf Life
Store between 15°C and 35°C.
Do not allow the product to freeze.
Agitate gently before use; viscosity can change during storage.
When stored correctly, the product is best used within 36 months of the production date.
Coating Compatibility
Nothing can be applied over Tectyl® 1079, and products underneath are not recommended.
Health, Safety & Handling
Read the current Safety Data Sheet (SDS) and product label for the exact supplied grade and market before use. Follow their requirements for ventilation, personal protective equipment, ignition control, storage, first aid and disposal. Do not discharge residues into drains, soil or water. Request the matching SDS from White House General Trading.
Frequently Asked Questions
What is Tectyl® 1079 used for?
Tectyl® 1079 is a light-coloured, solvent-cutback, wax-based paint preservative compound. It protects painted surfaces against atmospheric and environmental influences during transport and storage, and cures to a light-coloured, translucent, firm film.
How is Tectyl® 1079 applied?
Supplied ready to use; stir before use. Apply by airless or low-pressure air spray at 15-35°C.
Can Tectyl® 1079 be removed?
While still wet: Remove with Tectyl® Biocleaner, Tectyl® 150 or low-pressure steam. After drying and curing: Remove with Tectyl® 150. Direct sunlight: If exposed to direct sunlight, remove within 3 months and re-apply, otherwise removal becomes difficult.
How should Tectyl® 1079 be stored?
Store between 15°C and 35°C. Do not allow the product to freeze. Agitate gently before use; viscosity can change during storage. When stored correctly, the product is best used within 36 months of the production date.
Where can I request Tectyl® 1079 in the UAE?
Contact White House General Trading LLC, an authorized Tectyl distributor based in the UAE, for product selection, technical documents, availability and a quotation. Include the quantity, application and delivery destination.
Technical Documents
Manufacturer application guide · Manufacturer technical data sheet
Technical values above refer to the Europe-manufactured product documentation reviewed on 7 October 2026. Confirm that the current documents match the supplied product and market.
Explore More Tectyl® Resources
Choosing corrosion protection depends on your application, operating environment, and required protection period. Explore the Tectyl® Knowledge Hub for practical guidance on industrial corrosion protection, asset preservation, export packaging, long-term storage, and product selection.
For more guidance, browse our technical articles and corrosion prevention tips.
Explore Related Tectyl® Solutions
Compare products for different preservation and protection needs. For help confirming suitability for your application, contact our technical team.
- Tectyl® 502-C — Explore gearbox corrosion prevention.
- Tectyl® 506 — Learn about corrosion protection coatings.
- Tectyl® 506-EH Extra Heavy — Explore extra-heavy corrosion protection.
- Tectyl® 930 — Learn about engine preservation oil.
- Tectyl® Cavity Wax Non-Solvent Aerosol — Explore cavity protection in an aerosol format.
Why Choose White House General Trading?
White House General Trading LLC is an authorized Tectyl distributor based in the UAE, supporting product enquiries across the GCC, Middle East and Africa. Our team helps customers in industrial, marine, automotive, energy and manufacturing applications select products against their preservation and protection requirements.
Need Product Selection Support or a Quotation?
Tell us about the asset you need to protect, its operating or storage environment, and the required protection period. Our corrosion protection specialists can help you assess suitable products and application requirements.
