Description
The maximum performance of Tectyl™ Multipurpose
Transparent can be achieved only when the metal surfaces to be
protected are clean, dry and free of rust, oil and mill scale. CorPro
recommends a substrate temperature of 10-35 °C at the time of
product application.
Application
Tectyl™ Multipurpose Transparent gives a maximum
performance when it is sprayed at an ambient and product
temperature of 10-25 °C. Shake the can well before use and spray at
a distance of approximately 30 cm from the surface.
Tectyl™ Multipurpose Transparent is fast drying, and this can
cause ‘pin-holing’ when applied too thick at once. It is advised to
spray one layer per pass, wait for 2 to 3 minutes and then spray
another layer. Continue like this until the required film thickness has
been obtained.
Removal
Tectyl™ Multipurpose Transparent can be removed in the wet
phase with Tectyl™ Biocleaner, Tectyl™ 150 or low-pressure
steam. If dried and cured Tectyl™ Multipurpose Transparent
can be removed with Tectyl™ 150
Features & Benefits
Superior Protection
At the recommended DFT Tectyl™ Multipurpose Transparent
will protect against corrosion.
Non-conducting
The special nonconductive formulation makes Tectyl™
Multipurpose Transparent the ideal product to protect wiring in
cars and industrial applications.
Processing
Tectyl™ Multipurpose Transparent is easy to apply and easy to
remove, when no longer needed.
Economical
With a Dry Film Thickness of only 45 microns, Tectyl™
Multipurpose Transparent can protect a big surface with just a
little amount of the product.
